Expressions¶
- Author:
Dirk Tilger
- Contact:
dirk at MIRIUP.DE
- Author:
Umberto Nicoletti
- Contact:
umberto.nicoletti at gmail.com
- Last Updated:
2018-08-24
Introduction¶
As of version 6.0, expressions are used in four places:
In LAYER FILTER to specify the features of the dataset that are to be included in the layer.
In CLASS EXPRESSION to specify to which features of the dataset the CLASS applies to.
In CLASS TEXT to specify text for labeling features.
In STYLE GEOMTRANSFORM.
String quotation¶
Strings can be quoted using single or double quotes:
'This is a string'
"And this is also a string"
Quotes escaping in strings¶
Notitie
Quotes escaping is not supported in MapServer versions lower than 5.0.
Starting with MapServer 5.0, if your dataset contains double-quotes, you can use a C-like escape sequence:
"National \"hero\" statue"
To escape a single quote use the following sequence instead:
"National \'hero\' statue"
Starting with MapServer 6.0 you don’t need to escape single quotes within double quoted strings and you don’t need to escape double quotes within single quoted strings. In 6.0 you can also write the string as follows:
'National "hero" statue'
...
To escape a single quote use the following sequence instead:
"National 'hero' statue"
Using attributes¶
Attribute values can be referenced in the Map file and used in expressions. Attribute references are case sensitive and can be used in the following types of expressions:
Referencing an attribute is done by enclosing the attribute name in square brackets, like this: [ATTRIBUTENAME]. Then, every occurrence of “[ATTRIBUTENAME]” will be replaced by the actual value of the attribute “ATTRIBUTENAME”.
Example: The data set of our layer has the attribute “BUILDING_NAME”. We want the value of this attribute to appear inside a string. This can be accomplished as follows (single or double quotes):
'The [BUILDING_NAME] building'
For the building which has its BUILDING_NAME attribute set to “Historical Museum”, the resulting string is:
'The Historical Museum building'
For Raster Data layers special attributes have been defined that can be used for classification, for example:
[PIXEL] … will become the pixel value as number
[RED], [GREEN], [BLUE] … will become the color value for the red, green and blue component in the pixel value, respectively.
Expression Types¶
Expression are used to match attribute values with certain logical checks. There are three different types of expressions you can use with MapServer:
String comparisons: A single attribute is compared with a string value.
Regular expressions: A single attribute is matched with a regular expression.
List expressions: Compare a string attribute to a list of multiple possible values
Logical “MapServer expressions”: One or more attributes are compared using logical expressions.
String comparison (equality)¶
String comparison means, as the name suggests, that attribute values are checked if they are equal to some value. String comparisons are the simplest form of MapServer expressions and the fastest option.
To use a string comparison for filtering a LAYER, both FILTERITEM and FILTER must be set. FILTERITEM is set to the attribute name. FILTER is set to the value for comparison. The same rule applies to CLASSITEM in the LAYER object and EXPRESSION in the CLASS object.
Example for a simple string comparison filter
FILTER "2005"
FILTERITEM "year"
would match all records that have the attribute “year” set to “2005”. The rendered map would appear as if the dataset would only contain those items that have the “year” set to “2005”.
Similarly, a classification for the items matched above would be done by setting the CLASSITEM in the LAYER and the EXPRESSION in the CLASS:
LAYER
NAME "example"
CLASSITEM "year"
...
CLASS
NAME "year-2005"
EXPRESSION "2005"
...
END
END
For reasons explained later, the values for both CLASSITEM and FILTERITEM should start with neither a ‘/’ nor a ‘(’ character.
Regular expression comparison¶
Regular expressions are a standard text pattern matching mechanism from the Unix world. The functionality of regular expression matching is provided by the operating system on UNIX systems and therefore slightly operating system dependent. However, their minimum set of features are those defined by the POSIX standard. The documentation of the particular regular expression library is usually in the “regex” manual page (“man regex”) on Unix systems.
Regular expression with MapServer work similarly to string comparison, but allow more complex operation. They are slower than pure string comparisons, but might be still faster than logical expression. As for string comparison, when using a regular expressions, FILTERITEM (LAYER FILTER) or CLASSITEM (CLASS EXPRESSION) has to be defined if the items are not included in the LAYER FILTER or CLASS EXPRESSION.
A regular expression typically consists of characters with special meanings and characters that are interpreted as they are. Alphanumeric characters (A-Z, a-z and 0-9) are taken as they are. Characters with special meanings are:
. will match a single character.
[ and ] are used for grouping. For example [A-Z] would match the characters A,B,C,…,X,Y,Z.
{, }, and * are used to specify how often something should match.
^ matches the beginning, $ matches the end of the value.
The backslash \ is used to take away the special meaning. For example \$ would match the dollar sign.
MapServer supports two regex operators:
~ case sensitive regular expression
~* case insensitive regular expression
The following LAYER configuration would have all records rendered on the map that have “hotel” in the attribute named “placename”
LAYER
NAME 'regexp-example'
FILTERITEM 'placename'
FILTER /hotel/
...
END
Notitie
For FILTER, the regular expression is case-sensitive, thus records having “Hotel” in them would not have matched.
Example: Match records that have a value from 2000 to 2010 in the attribute “year”:
FILTERITEM "year"
FILTER /^20[0-9][0-9]/
Example: Match all the records that are either purely numerical or empty
FILTER /^[0-9]*$/
Example: Match all the features where the name attribute ends with “by”, “BY”, “By” or “bY” (case insensitive matching):
EXPRESSION ('[name]' ~* 'by$')
Example: Match all the features where the rdname attribute starts with “Main”.
LAYER
...
CLASSITEM 'rdname'
CLASS
EXPRESSION /^Main.*$/
Notitie
If you experience frequently segmentation faults when working with MapServer and regular expressions, it might be that your current working environment is linked against more than one regular expression library. This can happen when MapServer is linked with components that bring their own copy, like the Apache httpd or PHP. In these cases the author has made best experiences with making all those components using the regular expression library of the operating system (i.e. the one in libc). That involved editing the build files of some of the components, however.
List expressions¶
Nieuw in versie 6.4.
List expressions (see MS RFC 95: Support for lists in expression parser) are a performant way to compare a string attribute to a list of multiple possible values. Their behavior duplicates the existing regex or MapServer expressions, however they are significantly more performant. To activate them enclose a comma separated list of values between {}, without adding quotes or extra spaces.
LAYER
NAME 'list-example'
CLASSITEM 'roadtype'
...
CLASS
EXPRESSION {motorway,trunk}
#equivalent to regex EXPRESSION /motorway|trunk/
#equivalent to MapServer EXPRESSION ("[roadtype]" IN "motorway,trunk")
...
END
CLASS
# spaces in attribute names are supported
EXPRESSION {primary road,secondary road}
...
END
END
Waarschuwing
List expressions do not support quote escaping, or attribute values that contain a comma in them.
“MapServer expressions”¶
MapServer expressions are the most complex and depending how they are written can become quite slow. They can match any of the attributes and thus allow filtering and classification depending on more than one attribute. Besides pure logical operations there are also expressions that allow certain arithmetic, string and time operations.
To be able to use a MapServer expression for a FILTER or EXPRESSION value, the expression has to finally become a logical value.
Typing¶
The type of attributes and literals is determined as followed :
Strings: enclosed in quote or single quote characters
"[string_attribute]" or '[string_attribute]'
"string_literal" or 'string_literal'
Numbers: no quoting
[numeric_attribute]
numeric_value
Date-time: enclosed in backquote characters
`[date_time_attribute]`
`date_time_literal`
Logical expressions¶
Logical expressions take logical values as their input and return logical values. A logical expression is either ‘true’ or ‘false’. The full expression needs to be surrounded by brackets, but individual logical expressions only require brackets to establish precedence or for clarity.
( Expression1 AND Expression2 )
( ( Expression1 ) AND ( Expression2 ) )
( ( Expression1 ) && ( Expression2 ) )
returns true when both of the logical expressions (Expression1 and Expression2) are true.
( ( Expression1 ) OR ( Expression2 ) )
( ( Expression1 ) || ( Expression2 ) )
returns true when at least one of the logical expressions (Expression1 or Expression2) is true.
NOT ( Expression1 )
! ( Expression1 )
returns true when Expression1 is false.
String expressions that return a logical value¶
Syntactically, a string is something encapsulated in single or double quotes.
( “String1” eq “String2” )
( “String1” == “String2” ) - deprecated since 6.0
( “String1” = “String2” )
returns true when the strings are equal. Case sensitive.
( “String1” =* “String2” )
returns true when the strings are equal. Case insensitive.
( “String1” != “String2” )
( “String1” ne “String2” )
returns true when the strings are not equal.
( “String1” < “String2” )
( “String1” lt “String2” )
returns true when “String1” is lexicographically smaller than “String2”
( “String1” > “String2” )
( “String1” gt “String2” )
returns true when “String1” is lexicographically larger than “String2”.
( “String1” <= “String2” )
( “String1” le “String2” )
returns true when “String1” is lexicographically smaller than or equal to “String2”
( “String1” >= “String2” )
( “String1” ge “String2” )
returns true when “String1” is lexicographically larger than or equal to “String2”.
( “String1” IN “token1,token2,…,tokenN” )
returns true when “String1” is equal to one of the given tokens.
Notitie
The separator for the tokens is the comma. That means that there can not be unnecessary white space in the list and that tokens that have commas in them cannot be compared.
( “String1” ~ “regexp” )
returns true when “String1” matches the regular expression “regexp”. This operation is identical to the regular expression matching described earlier.
( “String1” ~* “regexp” )
returns true when “String1” matches the regular expression “regexp” (case insensitive). This operation is identical to the regular expression matching described earlier.
Arithmetic expressions that return a logical value¶
The basic element for arithmetic operations is the number. Arithmetic operations that return numbers will be covered in the next section.
( n1 eq n2 )
( n1 == n2 ) - deprecated since 6.0
( n1 = n2 )
returns true when the numbers are equal.
( n1 != n2 )
( n1 ne n2 )
returns true when the numbers are not equal.
( n1 < n2 )
( n1 lt n2 )
returns true when n1 is smaller than n2.
( n1 > n2 )
( n1 gt n2 )
returns true when n1 is larger than n2.
( n1 <= n2 )
( n1 le n2 )
returns true when n1 is smaller than or equal to n2.
( n1 >= n2 )
( n1 ge n2 )
returns true when n1 is larger than or equal to n2.
( n1 IN “number1,number2,…,numberN” )
returns true when n1 is equal to one of the given numbers.
Spatial expressions that return a logical value (GEOS)¶
( shape1 eq shape2 )
returns true if shape1 and shape2 are equal
( shape1 intersects shape2 )
Nieuw in versie 6.0.
returns true if shape1 and shape2 intersect
( shape1 disjoint shape2 )
Nieuw in versie 6.0.
returns true if shape1 and shape2 are disjoint
( shape1 touches shape2 )
Nieuw in versie 6.0.
returns true if shape1 and shape2 touch
( shape1 overlaps shape2 )
Nieuw in versie 6.0.
returns true if shape1 and shape2 overlap
( shape1 crosses shape2 )
Nieuw in versie 6.0.
returns true if shape1 and shape2 cross
( shape1 within shape2 )
Nieuw in versie 6.0.
returns true if shape1 is within shape2
( shape1 contains shape2 )
Nieuw in versie 6.0.
returns true if shape1 contains shape2
( shape1 dwithin shape2 )
Nieuw in versie 6.0.
returns true if the distance between shape1 and shape2 is equal to 0
( shape1 beyond shape2 )
Nieuw in versie 6.0.
returns true if the distance between shape1 and shape2 is greater than 0
String operations that return a string¶
“String1” + “String2’
returns “String1String2”, that is, the two strings concatenated to each other.
Functions that return a string¶
tostring ( n1, “Format1” )
Nieuw in versie 6.0.
uses “Format1” to format the number n1 (C style formatting - sprintf).
commify ( “String1” )
Nieuw in versie 6.0.
adds thousands separators (commas) to a long number to make it more readable
upper ( “String1” )
Nieuw in versie 7.0.
force all characters to uppercase
lower ( “String1” )
Nieuw in versie 7.0.
force all characters to lowercase
initcap ( “String1” )
Nieuw in versie 7.0.
force the first character to uppercase and the rest of the characters to lower case for EACH word in the string.
firstcap ( “String1” )
Nieuw in versie 7.0.
force the first character to uppercase and the rest of the characters to lower case in the first word in the string.
String functions that return a number¶
length ( “String1” )
returns the number of characters of “String1”
Arithmetic operations and functions that return a number¶
round ( n1 , n2 )
Nieuw in versie 6.0.
returns n1 rounded to a multiple of n2: n2 * round(n1/n2)
round ( n1 )
Nieuw in versie 8.0.
returns n1 rounded to the closest integer (SLD interoperability addition)
n1 + n2
returns the sum of n1 and n2
n1 - n2
returns n2 subtracted from n1
n1 * n2
returns n1 multiplied with n2
n1 / n2>
returns n1 divided by n2
-n1
returns n1 negated
n1 ^ n2
returns n1 to the power of n2
n1 % n2
returns n1 % n2 (the modulus operator). This returns the remainder after division of one number by another, for example 10 % 3 returns 1.
Notitie
When the numerical operations above are used like logical operations, the following rule applies: values equal to zero will be taken as ‘false’ and everything else will be ‘true’. That means the expression
( 6 + 5 )
would return true, but
( 5 - 5 )
would return false.
Spatial functions that return a number (GEOS)¶
area ( shape1 )
Nieuw in versie 6.0.
returns the area of shape1
Spatial functions that return a shape (GEOS)¶
fromtext ( “String1” )
Nieuw in versie 6.0.
returns the shape corresponding to String1 (WKT - well known text)
fromText('POINT(500000 5000000)')
buffer (shape1 , n1 )
Nieuw in versie 6.0.
returns the shape that results when shape1 is buffered with bufferdistance n1
difference ( shape1 , shape2 )
Nieuw in versie 6.0.
returns the shape that results when the common area of shape1 and shape2 is subtracted from shape1
Temporal expressions¶
MapServer uses an internal time type to do comparison. To convert a string into this time type it will check the list below from the top and down to check if the specified time matches, and if so, it will do the conversion. The following are integer values: YYYY - year, MM - month, DD - date, hh - hours, mm - minutes, ss - seconds. The following are character elements of the format: - (dash) - date separator, : (colon) - time separator, T - marks the start of the time component (ISO 8601), space - marks the end of the date and start of the time component, Z - zulu time (0 UTC offset).
`YYYY-MM-DDThh:mm:ssZ`
`YYYY-MM-DDThh:mm:ss`
`YYYY-MM-DD hh:mm:ss`
`YYYY-MM-DDThh:mm`
`YYYY-MM-DD hh:mm`
`YYYY-MM-DDThh`
`YYYY-MM-DD hh`
`YYYY-MM-DD`
`YYYY-MM`
`YYYY`
`Thh:mm:ssZ`
`Thh:mm:ss`
For temporal values obtained this way, the following operations are supported:
( t1 eq t2 )
( t1 == t2 ) - deprecated since 6.0
( t1 = t2 )
returns true when the times are equal.
( t1 != t2 )
( t1 ne t2 )
returns true when the times are not equal.
( t1 < t2 )
( t1 lt t2 )
returns true when t1 is earlier than t2
( t1 > t2 )
( t1 gt t2 )
returns true when t1 is later than t2.
( t1 <= t2 )
( t1 le t2 )
returns true when t1 is earlier than or equal to t2
( t1 >= t2 )
( t1 ge t2 )
returns true when t1 is later than or equal to t2.